> Maydos Nitrocellulose Wood Varnish
Maydos
Maydos
> Products > Wood paint

 

Model: M8100 (Glossy) M8103 (Matt) M8105 (Semi-glossy) M8100D (Primer)

 

Maydos Nitrocellulose Wood Varnish

 

Model

Base

Thinner

Mixing Ratio

Base: Thinner

M8100

Nitrocellulose varnish (Glossy)

GMX43

1: 1

M8103

Nitrocellulose varnish (Matt)

GMX43

1: 1

M8105

Nitrocellulose varnish (Semi-glossy)

GMX43

1: 1

M8100D

Nitrocellulose varnish (Primer)

GMX43

1: 1

 

 

 

 

 

 

 

 

Description:

Maydos nitrocellulose based wood varnish (lacquer) is developed for many usages over any wood. It is suitable for interior wood furniture, bamboo or cane products and it can show a clear crystal appearance with different sheen. Pure quality of materials without foreign particles ensures the performance of decoration.

 

Advantages:

1. No need hardeners, ensure your health;
2.Special yellowing resistant formula which preserves gloss;
3.Fast surface drying speed which saves labor and time;
4. Good leveling property, easy application and repair.


Packing: 1L, 2L, 3L, 4L, 18L and 200L

Colors: clear and colors with transparent effect or non-transparent effect

Shelf Life: 12 months (use up in 4 hrs after mixing)

Gloss: Gloss, Matt, Semi-matt

Dilution Ratio (Base: Thinner): 1: 1 (NO HARDENER NEEDED)

Theoretical Coverage (mixed complex): 12-14m2/kg/coat

Drying: (25, relative humidity: 75%)

Touch Dry: 20min

Hard Dry: 8 hours

Application Method: Brush, Airless Spray

 

Preparation and Application

1.        To Make sure all surfaces must be clean, dry and free from wax, grease, oil etc.

2.        For bare wood, sand down in the direction of the grain until smooth with fine abrasive sandpaper. Start with 80# sandpaper, and then150# and last 220#. Use clean cloth to remove dust between each sanding.

3.        If you are using paint as a topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.

4.        Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat has dried, sand it lightly with fine abrasive paper to remove any raised grain.

5.        Brush or spray another coat of paint and allow it to dry.

6.        Continue to apply coats of paint until you achieve the surface build-up you desire.

7.        Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with steel wool or synthetic steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, polish the surface with paste wax or furniture polish.

Safety Note:

1.      Always apply the paints in a well-ventilated place.

2.      Wear eye protection and rubber gloves to prevent exposure to paints.

3.      This product is highly flammable liquid. May cause sensitization by inhalation and skin contact

4.      This product is by professional use only

 
Online Inquiry

©2014 Guangdong Maydos Building Materials Co.,Ltd
Tel: (+86-757) 27339931/ 27332177 Fax: (+86-757) 27339097
Address:Sanzhou Industrial Zone, Lunjiao, Shunde district, Foshan city, Guangdong province, China. 528308